Betaflight MCP

An MCP (Model Context Protocol) server that exposes Betaflight flight controller control to AI assistants such as Claude. It communicates with the FC over a serial connection using the MSP binary protocol and the Betaflight CLI text interface. Use it at your own risk — it can send any command the CLI allows, including ones that may cause crashes, flyaways, or other unsafe conditions if misused. Always review tool actions before approving them in Claude.

Features

Real-time sensor reads — attitude, IMU, GPS, RC channels, motors, battery
Full CLI access — feature flags, variable get/set, dump/diff, save, defaults
Auto-generated variable tools: ~762 CLI-configurable variables each exposed as a get_<name> / set_<name> tool pair, derived from the Betaflight firmware source
Expert PID tuning skill — automatically activates in Claude Code when tuning topics come up

Claude Code Plugin

This repo ships a Claude Code plugin in the plugin/ directory, which bundles:

The PID tuning skill — activates automatically when you mention Betaflight, PID tuning, filter tuning, propwash, oscillations, etc.
The MCP server config — connects Claude Code to the betaflight-mcp server

Install the plugin

1. Build the server (required before first use):

pnpm install
pnpm build

2. Add the local marketplace — in Claude Code, run:

/plugin marketplace add /path/to/betaflight-mcp

Replace /path/to/betaflight-mcp with the absolute path to your cloned repository (the repo root, not the plugin/ subdirectory).

3. Install the plugin — run /plugin to open the plugin manager, go to the Discover tab, find betaflight-mcp, and install it.

4. Configure the server path — run the setup command:

/betaflight-mcp-setup

This replaces the placeholder in the cached plugin's .mcp.json with the absolute path to dist/server.js on your machine. The repo's plugin/.mcp.json is left untouched so the placeholder stays clean for git. Restart Claude Code afterwards.

Updating the plugin

After pulling new changes from the repo, rebuild and reinstall the plugin:

pnpm build

Then in Claude Code, go to /plugin → Installed tab, uninstall betaflight-mcp, switch to Discover, and reinstall it. Run /betaflight-mcp-setup again afterwards — reinstalling overwrites the cached .mcp.json with the placeholder.

Claude Desktop users: The plugin system is a Claude Code (CLI) feature and is not available in Claude Desktop. Claude Desktop users configure the MCP server manually via claude_desktop_config.json (see platform-specific setup below) — this gives full access to all ~1554 tools. The PID tuning skill does not auto-activate in Claude Desktop; as a workaround, create a Claude Project and attach plugin/skills/betaflight-pid-tuning/SKILL.md as project knowledge so it is always in context.

CLI commands and variables as MCP tools

All CLI-configurable variables are exposed as individual get_<name> / set_<name> tool pairs, auto-generated from the Betaflight firmware source (settings.c, ~762 variables), enriched with descriptions from the CLI reference docs.

Run pnpm generate to regenerate src/generated/variables.ts after a Betaflight release.

Development

pnpm generate      # Re-fetch firmware sources + Cli.md, regenerate src/generated/variables.ts
pnpm dev           # Run directly via tsx (no build step)
pnpm build         # pnpm generate (prebuild) → tsc → dist/
pnpm typecheck     # Type-check without emitting
pnpm lint          # ESLint over src/

Architecture

Claude Desktop
    │  stdio (MCP JSON-RPC)
    ▼
betaflight-mcp
    ├── MSP binary protocol  ←→  FC (real-time sensor reads)
    └── CLI text interface   ←→  FC (configuration, variables)

The server maintains a single serial connection shared between the MSP client and the CLI client, serialised via a FIFO mutex so commands never interleave on the wire.

Using with Claude Desktop

The server communicates over stdio — Claude Desktop spawns it as a subprocess and pipes stdin/stdout for MCP JSON-RPC. There is no HTTP port.

Choose the approach that matches your operating system.

Windows — Native (recommended)

Docker Desktop on Windows uses a WSL2 Linux VM. Passing COM ports into a Linux container requires USBIPD-WIN and is non-trivial. Running the server natively with Node.js is the simpler path on Windows.

Prerequisites

Node.js 22+ (LTS)
pnpm: npm install -g pnpm
Visual Studio Build Tools with the Desktop development with C++ workload (required to compile the serialport native addon)
Claude Desktop (latest version)

1. Install and build

pnpm install
pnpm build

The build command automatically runs pnpm generate to fetch the latest Betaflight firmware sources and generate variable tools.

2. Find your COM port

Open Device Manager → Ports (COM & LPT) and note the port assigned to your flight controller (e.g. COM3).

3. Configure Claude Desktop

Click the Claude menu and select Settings…, then navigate to the Developer tab and click Edit Config.

This opens %APPDATA%\Claude\claude_desktop_config.json. Add the following configuration:

{
  ...,
  "mcpServers": {
    ...,
    "betaflight": {
      "command": "node",
      "args": ["C:\\path\\to\\betaflight-mcp\\dist\\server.js"]
    }
  }
}

Replace C:\\path\\to\\betaflight-mcp with the absolute path to your cloned repository. Use escaped backslashes (\\) or forward slashes (/).

Understanding the Configuration:

"betaflight": A friendly name that appears in Claude Desktop

"command": "node": Runs the server using Node.js

"args": Path to the compiled server JavaScript file

Security Consideration: The server requires access to serial ports to communicate with your flight controller. It runs with your user account permissions. Only connect to flight controllers you trust and always review tool actions before approving them in Claude.

4. Restart Claude Desktop

Completely quit and restart Claude Desktop to load the new configuration.

5. Verify the connection

Upon successful restart, you'll see an MCP server indicator (hammer icon) in the bottom-right corner of the conversation input box. Click it to view available Betaflight tools.

To connect to your flight controller, tell Claude:

Connect to my flight controller on COM3

Claude will use the connect_flight_controller tool with your specified COM port.

Windows — Docker via USBIPD (advanced)

If you prefer Docker on Windows, you'll need to bridge USB devices into WSL2.

Prerequisites

Docker Desktop with WSL2 integration enabled
USBIPD-WIN for USB device sharing

1. Share your USB device with WSL2

In an elevated PowerShell:

# Find your flight controller's BUSID
usbipd list

# Bind and attach the device to WSL2
usbipd bind --busid <BUSID>
usbipd attach --wsl --busid <BUSID>

2. Verify device in WSL2

Open a WSL2 terminal and verify the device appears:

ls /dev/ttyACM*

3. Build the Docker image

From your WSL2 terminal in the project directory:

docker build -t betaflight-mcp .

4. Configure Claude Desktop

Follow the Linux/macOS Docker configuration steps above, using the device path from WSL2 (e.g., /dev/ttyACM0).

Linux / macOS — Docker (recommended)

1. Build the image

docker build -t betaflight-mcp .

The build fetches the latest Betaflight firmware sources and CLI reference from GitHub and compiles TypeScript. An internet connection is required.

2. Find your serial device path

Connect your flight controller via USB, then:

# Linux
ls /dev/tty{USB,ACM}*

# macOS
ls /dev/cu.*

Common values: /dev/ttyUSB0, /dev/ttyACM0 (Linux) · /dev/cu.usbmodem* (macOS).

3. Configure Claude Desktop

Click the Claude menu and select Settings…, then navigate to the Developer tab and click Edit Config.

This opens the configuration file:

| Platform | Path | |----------|------| | macOS | ~/Library/Application Support/Claude/claude_desktop_config.json | | Linux | ~/.config/Claude/claude_desktop_config.json |

Add the following configuration, replacing /dev/ttyACM0 with your actual device path:

{
  "mcpServers": {
    ...,
    "betaflight": {
      "command": "docker",
      "args": [
        "run", "--rm", "-i",
        "--device", "/dev/ttyACM0:/dev/ttyACM0",
        "betaflight-mcp"
      ]
    }
  }
}

Understanding the Configuration:

"betaflight": A friendly name that appears in Claude Desktop

"command": "docker": Runs the server in a Docker container

"--rm": Automatically removes the container after exit

"-i": Enables interactive mode for stdio communication

"--device": Grants the container access to the serial device

Security Consideration: Granting Docker access to a serial device allows the container to communicate with your flight controller. The container runs with limited permissions, but ensure you only connect to flight controllers you trust.

4. Restart Claude Desktop

Completely quit and restart Claude Desktop to load the new configuration.

5. Verify the connection

Upon successful restart, you'll see an MCP server indicator (hammer icon) in the bottom-right corner of the conversation input box. Click it to view available Betaflight tools.

To connect to your flight controller, tell Claude:

Connect to my flight controller on /dev/ttyACM0

Claude will use the connect_flight_controller tool with your specified device path.

MCP Servers

Betaflight MCP

Features

Claude Code Plugin

Install the plugin

Updating the plugin

CLI commands and variables as MCP tools

Development

Architecture

Using with Claude Desktop

Windows — Native (recommended)

Prerequisites

1. Install and build

2. Find your COM port

3. Configure Claude Desktop

4. Restart Claude Desktop

5. Verify the connection

Windows — Docker via USBIPD (advanced)

Prerequisites

1. Share your USB device with WSL2

2. Verify device in WSL2

3. Build the Docker image

4. Configure Claude Desktop

Linux / macOS — Docker (recommended)

1. Build the image

2. Find your serial device path

3. Configure Claude Desktop

4. Restart Claude Desktop

5. Verify the connection

安装包（如果需要）

Cursor 配置 (mcp.json)

Betaflight MCP

Features

Claude Code Plugin

Install the plugin

Updating the plugin

CLI commands and variables as MCP tools

Development

Architecture

Using with Claude Desktop

Windows — Native (recommended)

Prerequisites

1. Install and build

2. Find your COM port

3. Configure Claude Desktop

4. Restart Claude Desktop

5. Verify the connection

Windows — Docker via USBIPD (advanced)

Prerequisites

1. Share your USB device with WSL2

2. Verify device in WSL2

3. Build the Docker image

4. Configure Claude Desktop

Linux / macOS — Docker (recommended)

1. Build the image

2. Find your serial device path

3. Configure Claude Desktop

4. Restart Claude Desktop

5. Verify the connection

安装包 （如果需要）

Cursor 配置 (mcp.json)

安装包（如果需要）